Water purification information

Three misunderstandings after installing a water purifier

Views : 71091
Update time : 2021-11-29 17:36:06
In order to pursue safer and healthier water quality, many people have begun to install water purifiers. However, because people's knowledge and understanding of household water purifiers is far from enough, there are many misunderstandings in their use.

The following are three major misunderstandings that easily appear after the water purifier is installed. Come and see if you step on the thunder?
Misunderstanding 1: Water purifier does not need maintenance

After the little snow, the whole country ushered in a drop in temperature. To combat the cold in autumn and winter, it is not only ourselves, but also the water purifiers in the home also need to keep warm.

Due to the low temperature in winter, the water pipes are prone to bursting, and even failures such as water cuts may occur. Therefore, the antifreeze of the water purifier must not be ignored. Especially at night when there is frost in winter, the water purifier should pay special attention to anti-freezing to avoid the damage of low temperature to the water purification equipment.

Misunderstanding 2: Long-term storage without cleaning

If the water purifier is not used for a long time and the water is not circulating, soaking the filter element in this environment may easily cause the danger of bacterial growth and increased nitrite concentration.

Therefore, if you go out far away, you must rinse thoroughly before going home to use the water purifier again, so that the residual water in the filter element and the pipe can be drained, and the impact on the body such as the growth of bacteria can be reduced. Wait until it is rinsed repeatedly, and then use fresh water.

It is recommended to rinse for 5-10 minutes in 3 to 5 days, and rinse for 15 minutes within 15 days. After 15 days of rinse, the water quality is detected before drinking.
If you don’t use it for a long time, the water output after repeated washing is still much lower than before, or there is almost no water, you need to consider replacing the filter element.
Avoiding these misunderstandings can help us use the water purifier better and enjoy a healthy water life.


Misunderstanding 3: The filter element does not need to be replaced regularly

Many people think that replacing the filter element of the water purifier is a very troublesome thing, or forget to change the filter element because there is no reminder of the life of the filter element. Over time, when the filter element is overloaded, it becomes a breeding ground for bacteria, causing secondary pollution of the water source. At the same time, other filter elements will be damaged step by step, causing problems such as reduced filter element life and filter capacity failure, which may even affect the service life of the water purifier in severe cases.

Therefore, the filter element must be replaced regularly in order to achieve an effective filtering effect.

In traditional thinking, we always feel that replacing the filter element of the water purifier requires tools such as screwdrivers, wrenches, and pliers, and even requires professionals to deal with it.

 

 
The aicksn water purifier does not need to move the machine, cut off the water and professional tools, easy to use. One twist and one twist is as easy as changing a light bulb.
Related News
Read More >>
Do you know how to reduce the operating costs of RO reverse osmosis water treatment plants? Do you know how to reduce the operating costs of RO reverse osmosis water treatment plants?
Sep .29.2024
The principle of reverse osmosis technology is higher than the osmotic pressure of the solution, based on other substances can not pass through the semi-permeable membrane and these substances and water to leave.The membrane pore size of the reverse osmosis membrane is very small, so it can effectively remove dissolved salts, colloids, microorganisms, organic matter, etc. in water.RO system because there is a high-pressure pump, and need to add a special scale inhibitor, high operating costs.How do we reduce the operating costs of the RO system?
Do you know what common instruments/meters are needed for reverse osmosis systems? Do you know what common instruments/meters are needed for reverse osmosis systems?
Sep .29.2024
In order to make the RO device can be safe and reliable operation, easy to monitor the operation process, should be equipped with the necessary instrumentation and control devices, generally need to install the instrumentation has a temperature meter, flow meter, pressure meter, conductivity meter, oxidation potential meter, chlorine meter, pH meter, specific as follows:
Does your reverse osmosis equipment often wash the membrane, change the membrane? Does your reverse osmosis equipment often wash the membrane, change the membrane?
Sep .27.2024
Users reflecting their own purchase of reverse osmosis equipment frequently wash membrane, reverse osmosis membrane use life is short and other issues. Today Susan organized a compilation of reverse osmosis equipment for reference, welcome to exchange, correction.